Добрый вечер! Помогите разобраться , не могу настроить шару через dlink dir320 , в папке /usr/local/etc поменял настройки на свои
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = *********,****
Account = ******,*******
Fallback = 0
Group = 1
ReconnectTimeout = 20
InactivityTimeOut = 15
CAID = 0500
IDENT = 023700,023d00,030600
вот лог программы , что у меня не так , заранее спасибо.
2010/04/10 18:35:20 4692 s version=0.8k-rc13m_full_fix_DANtes, system=mipsel-router-linux, nice=
2010/04/10 18:35:20 4692 s max. clients=30, client max. idle=99999 sec
2010/04/10 18:35:20 4692 s max. logsize=unlimited
2010/04/10 18:35:20 4692 s client timeout=7 sec, cache delay=0 msec
2010/04/10 18:35:20 4692 s shared memory initialized size=167280, fd=3)
2010/04/10 18:35:20 4692 s no sid lists found
2010/04/10 18:35:20 4692 s userdb reloaded: 0 accounts freed, 2 accounts loaded
2010/04/10 18:35:20 4692 s signal handling initialized type=sysv)
2010/04/10 18:35:20 4692 s can't open file "/usr/local/etc/mpcs.srvid" err=2), no service-id's
2010/04/10 18:35:20 4692 s 28 lengths for caid guessing loaded
2010/04/10 18:35:20 4692 s monitor: initialized fd=7, port=988)
2010/04/10 18:35:20 4692 s camd 3.3x: disabled
2010/04/10 18:35:20 4692 s camd 3.5x: disabled
2010/04/10 18:35:20 4692 s cs378x: disabled
2010/04/10 18:35:20 4692 s newcamd: disabled
2010/04/10 18:35:20 4692 s radegast: disabled
2010/04/10 18:35:20 4692 s logger started pid=4698)
2010/04/10 18:35:20 4692 s resolver started pid=4699, delay=30 sec)
2010/04/10 18:35:20 4692 s proxy started pid=4700, server=195.189.247.118)
2010/04/10 18:35:20 4700 p02 proxy 195.189.247.118:3001 newcamd525 fd=4)
2010/04/10 18:35:20 4692 s serial: initialized pid=4701, auto@/dev/ttyS0)
2010/04/10 18:35:44 4692 s client(2) connect from 192.168.1.226 pid=4790, pipfd=13)
2010/04/10 18:35:44 4790 m02 plain monitor-client 192.168.1.226 granted tuner, lvl=4)
|